John deere 14 sb mower, axel broke ,
Hey Guys, I have a john deer nodel 14 sb with the kaw. engine, rear axel broke , do i need a whole new trani assembly or just the axel and does anyone know where I can get a parts list? Thanks , Blacke
View ArticleKohler Pro 26 hp Ignition Module
I have a craftsman Garden tractor model 917.287480 with a 26 hp Kohler pro engine serial # 3703937783 model sv735 0016 engine. My original manual says the ignition module replacement # is 24 584 36-s...
View ArticleBrand new Bluemax chain saw quit on the first job and wont restart
I got a brand new Bluemax 14/20" 45cc 2kW chainsaw, model 50969. It was an overstock and I got it cheap with no warranty but it had never been used. It started right up and purred like a kitten. Got my...
View ArticleGrass
I have a john deere 48" mower and i must admit it does not cut grass worth a flip.:mad: correction:It will cut grass that is really short. It leaves a strip down the middle and even on the edges at...
View ArticleEngine Honda parts gokart project
I'm needing a generator that has a big cage or 2. The generator part don't have to work because I'm going to use a few of those cages around them. At least one of the need an engine 10 HP or above
View ArticleEngine Poulan Courage XT-7 Kohler 173cc mower
I can start it right up, run it for a couple of minutes and it starts cutting out/losing power off and on for another couple of minutes like this, then quits, then gas slowly leaks from behind the air...
View ArticleRX-95 transaxle-no reverse
I have a JD RX-95 from my Father-in-law that doesn't want to reverse. It originally sounded like the gears in the transmission were stripped. I pulled it apart and found that one of the ring gears (for...
View ArticleNew Exmark Owner - It's already back in the shop!
Hi all, A few weeks ago we bought a brand new Exmark Lazer Z, and with only 14 hours on the meter it's back at the dealership. The port side hydro is leaking oil. We're not using it in a mowing...
View Articlegap
I have a lawn boy self propelled model 10520. It wasn't getting any spark so I'm putting a new coil in it. How big should the gap between the fly wheel and the coil be?
View ArticleJD L120 won't start
I can hear the solenoid clicking when key is turned but starter won't engage. Checked and getting power to starter so seem solenoid is working. So I'm guessing starter is the problem. However I do have...
View ArticleNo Spark
I have no spark from the coils i can unplug the coils and i have spark i traced the white wire to the delay relay changed out the relay still same problem any clues to where i should look next.
View ArticleClik here to view.
New (used) Honda HR215SXA with broken propulsion shaft? Help please
Hello everyone, been lurking here for awhile reading up on the forums. I found a very clean Honda HR215SXA that the grandson was selling from his grandfather's old storage. I picked it up for $50 but...
View ArticleEngine help on this one
have a kohler command pro 13 started and loaded on trailer this morning. would not start 1 hour later. changed coil just to be on safe side. still will not start. has fire, fuel, even sprayed starting...
View ArticleBriggs 3.5HP starts then dies (Yes, diaphragm was replaced)
So ready to bang my head up against the wall trying to fix this myself. The engine code is 098902-1110-B1 and it's mounted to an MTD edger if that matters. I have now replaced the diaphragm three...
View ArticleJohn Deere 185 fuel pump rebuild kit?
I have a John Deere 185 that I let sit in my garage for several years after a mouse built a nest in it one winter and had packed a whole bunch of seeds in the air cleaner. I cleaned it all out but I...
View Articlehelp me identify this mower
I recently obtained a mower and it needs some work but I am unable to understand the identifying label here is what's on the tag. Mod 1352/L028B 139-527-624 11hp 5 speed 26 inch cut. It is an older...
View ArticleClik here to view.
Any Idea of this Jacobsen Model?
The engine codes as 1981, yet I can't find any model number of this 20 inch cut mower. I need a new drive belt for it, and am looking for a part number... Thanks, Attached Images image-2209185731.jpg...
View ArticleChecking in...
Received an email reminder to introduce myself. Gregg Willow, Grand Rapids, MN. What's up? A friendly neighbor gave me a 1994 MTD LT 1442. Has a bit of issues, of course. Tires are shot and being...
View Article