RSD......Spindle Lub?
I see no zerks around the spindles of my RSD,am I missing something.....:thumbdown:
View ArticleJohn Deere 160 Spring Location
I have a John deere 160 that I have broken down and refurbished. The problem is I did not take a picture of the location for the spring that holds the blade hight linkage. If I set it on 4 before I...
View ArticleEngine Walker Electrical Problem
I have a 2005 Walker MT20. It would not start, the battery was weak, I replaced it and now it will start fine but when I push lever for forward travel the engine starts to shut down. I can pull back...
View ArticleHello all
Stopping by and saying hi to everyone. Started my own small engine repair. Thought that this might be of great help to be on here.
View ArticleClik here to view.
Jacobsen with sulky, what model is it?
Just found this forum. I have an old Jacobsen with sulky and I am looking for the model number. If I knew the model number I could possible find the manual. Can someone help me with the model number?...
View ArticleRepairs Is this push mower worth fixing???
A friend gave me a Craftsman self propelled (used to be) Lawn mower. Model 917.376571 -- S/N 020205M 000393. The engine starts OK but the self propelled part is cooked. He said that the gears in the...
View ArticlePoulon Pro lawn tractor went to idle then died and won't start
While cutting the grass the poulon pro lawn tractor suddenly went to idle speed for about 30 seconds and then died. Now it will not start.
View ArticleClik here to view.
Help get belt back on Honda HRR2162SDA
I was mowing the lawn the other day and the drive feature suddenly stopped working. I tipped the mower to the side and noticed that the belt had come loose. I took off the metal plate that covers the...
View Article10201 problems
I just got a lawn boy 10201 without self-propel. It is not starting up. The brake cable looks like there is a frayed apart and there is some spark but not a whole lot. I believe that it is just the...
View Articlefuel in the oil in Kohler commander CV 16 S engine in craftsman ride on mower
this engine normaly starts by pushing throttle control to top of travel (Choke position) pull back one notch when engine starts...lately it seemed to flood while cranking in choke position but it would...
View ArticlePrice Check selling Scag
Hi, Last year I bought a used Scag Tiger Cub with 23hp Vanguard engine, 61 in cut. I took on some new jobs and bought it so my wife could help me cut. This year we have cut back and have no use for it...
View ArticleGot 2 used HRX mowers over weekend. 1 makes my garage smell like a gas...
Found a barely used HRX217HYA and then a much older HRX217HXA with a serial MAGA 1036341. The reason I bring up the older one is that while both mower both start and cut great, the HXA smells like it's...
View ArticleHRR2167VKA runs fine for 10 minutes
then acts like it's running out of gas. Changed the oil and air filter as well as the spark plug. Any advice would be greatly appreciated, so thanks in advance!
View ArticleWeed Trimmer issue
Greetings, Just found this forum...looks like a great place to get some information and share some ideas! And...I need some advice on an old two stroke Crafstman trimmer. I had to replace the throttle...
View ArticleTecumseh Engine
I have a Tecumseh engine that needs to be rebuilt can it be stored without oil until I find time to rebuild it or should I add oil to the crank case. Thanks in advance Bama49 Roll Tide
View Articleexmark V48-14k-H want start up
I was using it the other day shut it off and it will not start back up. Checked to see if it was getting fire to the plug and its not. Its older and been used a lot around the farm but never had any...
View ArticleBolen 38" Deck Belt Tension.
I pulled my Bolen mower out of the woods after sitting there for several yrs. It cranked up perfectly after I changed the spark plug. The old belt was broken so I bought another one and put it on....
View Articlenewbie
Just logging in for 1st time.name tonyp2 have an old front engine snapper riding mower.
View ArticleClik here to view.
New Snapper to Me (Needs Work)
Hello All, I recently acquired this mower and I have noticed there are a few issues with it some major some minor. Pictures of mower: Largest issue about the mower is the rear right axle bearing has...
View ArticleNew to me Mower - Kohler
Hello Everyone I just discovered this forum and it is great. Now to my question. I just bought a Kohler Courage XT-7 from a garage sale for $20 (bargain) even though it is not working. It did not have...
View Article