Troy bilt tuff cut 210(2004 model I believe).Can I clean the oil out this way?
I read the gas tank can be cleaned by using 91% or higher isopropyl alcohol.Can I do the same where I fill the oil? I was thinking of removing the drain plug & letting it sit for a hour or 2....
View ArticleSeat switch working backwards
I just bought a 2004 toro timecutter with a broken engine. I replaced the engine and it is working fine other than the seat switch is backwards. The PTO will engage when I am not setting on the seat...
View ArticleElectric Clutch Removal
Last week I found my electric clutch to the mower deck was burning, red hot and flames. I put the fire out and now am trying to figure out how to hold the shaft to allow me to loosen the bolt and...
View Articlejust getting ready
just starting to put some things together for a small lawn mowing service starting next year. Just something to earn a little extra going into retirement
View Article10" tiller/cultivator Problem?
I have one of the 10" tiller/cultivators made by Noma, branded Dynamark, with a two-cycle Tecumseh engine (I've had it several years). Yesterday, I was tilling some garden with it when the tines...
View ArticleClik here to view.
2014 Pro-Turn 152 Fuel Switch Mislabeled
I noticed something yesterday right after my Gravely was delivered. I was driving it up and down the driveway trying to get used to the controls (first zero-turn & raining for the last couple days)...
View Articlex300
new here just bought this x300 need help was told it was a 2011 if there anybody that has a any manuals for the x300 the id is mox300c028214 and the dom is 06.12.06 don't know how the d o m any help be...
View ArticleManual????????????
does anyone know were I can download a free repair manual for a john deere x495. THANKS.
View ArticleNew life to an old Toro
I was recently given a 1978 model 20698 Toro that hadn't ran in years. It was as simple as a standard tune up to get it back running. With of course a through cleaning of the gas tank and carburetor...
View ArticleB&S 10T802 questions - muffler, etc
Hello all, I was gifted a Craftsman 20" walk behind lawn mower today, a 247.385100 if that makes sense. The motor on it is a B&S 10T802-0776-B1, according to the stamp on the block. It has a small...
View ArticleKawasaki FH680V is hard to start
After sitting idle over the winter this engine, on a Ferris mower with 900 hours, takes starting fluid and loads of cranking to start. Same if the engine is hot. Runs fine otherwise. Gas was treated...
View ArticleClik here to view.
19" & 21"Lawn mower with Honda engine
onlysherry0220(at)gmail.com Name:Lawn mover(3 speeds,self propelled,blade brake system) Power: Gasoline Specifications: 1) Mating power: Honda OHV 4 stroke cylinder 2) Max. power:...
View ArticleNewBe
When I have something worth saying I will contribute. I look every day, however I have a business to run. Which means I don't sit on this thing 24/7. But thanks for asking. Smile:
View ArticleLawnboy two cycle Silver(engine parts)
I have a complete(disassembled two cycle engine for sale. Needs lower shaft bearing and both shaft seals. V-engine 4.5 HP Also have a good carbureter: LMR-16 Walbro Blade mulching adapter with tapered...
View ArticleThinking of going new (rider & snow blower)
Hi All - Thinking of just getting some new equipment rather than buying used. My lot just under .5 acre, and looking for a small rider that can mostly mulch w/ option to bag. I want to buy something...
View ArticleLawnboy silver series drive problems
I am pretty familiar with mechanics, however my two cycle 10302 has drive(draggiing) problems. I contacted Lawnboy and they will respond in a few days. When I let go of the bail cable, the belt...
View Articlereverse disconnect
how to disconnect safety reverse wire fro a craftsman Z6000 model 247-240110
View ArticleClik here to view.
wheel crack
Any of you Honda guys ever repair these cracks? If so, how? Both rear wheels are cracked. I pulled the ones off my parts machine and they are cracked as well. Might be fine as it is, but wonder what...
View ArticleCraftsman 917.259540 Riding mower
Mowing grass and mower stopped moving. The rear end was shaking and vibrating somewhat before the tractor stopped moving. I imagine that the rear end has gone out, but am not sure.
View Articlecub cadet sltx 1054 blades slow down
I have a 2010 1054. The blades slow down if they even look at "tall" grass. The engine doesn't slow down though. I've triple checked the deck level and height, have been greasing everything diligently...
View Article