Hi Everyone
Just wondering if anyone has had issues with their Toro Z560 Zero Turn Electric PTO Clutch.
My Engine starts but when engaging the PTO the engine decelerates to a stall with no turning of PTO or blades. The PTO is intact and electrics all OK. I can hear the PTO engage in and out when operating the switch but when engaged the engine comes to a stop.
I dis-assembled the PTO thinking it may be a bearing but the 2 bearings move freely.
Can anyone suggest anything as it is expensive to troubleshoot by replacement. The clutch is a Warner 5218-99.
Many thanks in advance.
Mark
Just wondering if anyone has had issues with their Toro Z560 Zero Turn Electric PTO Clutch.
My Engine starts but when engaging the PTO the engine decelerates to a stall with no turning of PTO or blades. The PTO is intact and electrics all OK. I can hear the PTO engage in and out when operating the switch but when engaged the engine comes to a stop.
I dis-assembled the PTO thinking it may be a bearing but the 2 bearings move freely.
Can anyone suggest anything as it is expensive to troubleshoot by replacement. The clutch is a Warner 5218-99.
Many thanks in advance.
Mark